1-847-749-4845

Freight Claim

This author has written 8 articles

Freight Claim Quick Tip: Don’t Let the Driver Off Easy!

One of the easiest things you can do to improve freight claim recovery is to take a couple minutes to ensure that the bill of lading is accurate.

After loading, when the driver hands you the bill of lading to sign, check for a note that says “Shipper’s Load and Count”, “SL&C” or “SLAC”. This note means that the shipper counted the packages and loaded the shipment, and the carrier was not present during loading to verify the count and condition of the shipment. This notation protects the carrier from liability for shortages or damages when they were not able to check the initial condition or amount of cargo.

However, if your driver was present during loading, make sure that he doesn’t sign the bill of lading with any of these notations. This will release the carrier from any liability for shortages or damages by stating that the driver wasn’t present (even if he was).

More importantly, if the driver adds anything to the freight bill that isn’t true or you don’t agree with, don’t sign it. It could save you a lot of trouble later.

Are You Ready for Dimensional Weight Pricing?

 

In January 2015, shipments in both Canada and the US will be subject to new dimensional weight pricing. The pricing change will affect bulky but lightweight packages. Traditionally, as long as these packages were shipped by ground, and had a volume of less than 3 feet cubed, these packages were only charged by weight. However, with dimensional weight pricing, the volume of the package will also be taken into consideration, with larger packages being charged at higher rates, regardless of their weight.

The price change will occur across the board, with carriers such as FedEx, UPS, USPS, and Canada Post implementing the new pricing methods.

This will be a drastic change, with shipping prices for small and bulky items expected to increase by 20 – 60%. Therefore, it’s time to change your shipping practices.

Here are some tips for reducing shipping costs under the new dimensional weight pricing.

Stock More Box Sizes

It has been typical for small businesses to only carry a few sizes of boxes. The extra cost for shipping and void filler has been so minor that it was far lower than the cost of ordering and managing extra box sizes. With dimensional weight pricing, the reverse is true. Now it makes sense to keep extra sizes of boxes in stock in order to avoid increased shipping charges.

Build on Demand Boxes

Simply stocking a few extra sizes of boxes is the simplest and easiest solution for many small businesses. However, depending on the amount of parcel shipping you do, it may make sense to custom build each box to fit each product being shipped. Companies like Box on Demand
and Packsize are making this possible with machines that make custom sized boxes in-house, as they are needed.

Split Up Packages

Under the new shipping fee structure, it may be cheaper to ship 2 smaller packages instead of one large one. Be sure to create a chart or spreadsheet, or invest in software to help you determine your most cost-effective shipping option.

Zone Skipping

Zone skipping allows shippers to reduce the cost of parcel shipping by shipping several parcels by the truckload (or even by LTL) for the first part of the journey, and then finishing the journey via parcel shipping. For example, if you were shipping from North Dakota to several Southern states, you could ship a truckload of packages to Texas, and from there, utilize a parcel service such as FedEx or UPS to ship the packages to their final destinations in Arizona, California, and Louisiana. This solution is only possible if you are shipping high volumes of products.

In Conclusion

Whatever strategy you use, make sure to keep an eye on your shipping methods and costs in the new year, or else you could see your extra shipping costs add up.

Reduce Concealed Damage with Shipping & Handling Monitors

Concealed damage may be the most difficult type of freight claim to deal with. And in the event that your carrier pays your concealed damage claim at all, they will likely only pay a fraction of the usual claim value. Since concealed damage makes it difficult to prove if the damage was the fault of the shipper, carrier, or consignee, many carriers will only pay for one third of the value of the claim.

Of course, the simplest method for avoiding concealed damage is to inspect the shipment before signing the delivery receipt. However, unloading, unpacking, and inspecting every box of a shipment before letting the driver leave is not usually practical. It becomes even more difficult when the content is  sensitive electronic equipment that may not show damage until it is tested.

Another method for reducing the risk of concealed damage claims is to use shipping & handling monitors to alert you of potential damage. Here are some of the benefits of using these monitors:

Reduce Inspection Time

Rather than inspecting the contents of each package before signing off on the shipment, shipping & handling monitors allow you to simply check the status of the monitors. You can then sign the delivery receipt and unload your shipment with peace of mind knowing that your shipment has arrived undamaged.

Reduce Damage

Shipping & handling monitors typically include some type of warning sticker or label to indicate to the carrier that you are monitoring the handling of your freight. This ensures better treatment and more careful handling by carriers, reducing the risk of damage.

Clear Evidence

In the event that there is damage, shipping & handling monitors provide clear evidence to help back up your claim. The monitors will be highly useful if you need to take your claim to court. However, when carriers see that you have a good case, they will generally pay your claim without the need for lawsuit.

Identify Responsible Parties

Many shipping & handling monitors even add time stamps to the traumatic events they are tracking, such as tilt or impact. This allows you to tie the damage to the correct party in the supply chain. No more reason for the carrier, shipper, and consignee to each be responsible for one third of the claim – now the responsible party can pay the entire claim.

Disadvantages of Shipping & Handling Monitors

While shipping & handling monitors will indicate potential damage, they cannot warn you if your shipment is short, so you will still need to count your pallets and packages. And of course, before using monitors, you need to consider the cost. Prices will range depending on the sophistication of the device. You will also want to consider if you should purchase a single use or re-useable monitor. When deciding if monitors are worth the cost, consider your freight damage rate, cost of replacement, and cost of the device. This will allow you to determine whether shipping & handling monitors will save or cost you money in the long run.

How to Reduce Packaging Costs – Without Increasing Claim Costs

With profit margins shrinking and clients becoming more and more price conscious, it’s natural to try to reduce costs wherever you can. Packaging is as good a place to cut costs as any. However, a reduction in the amount or quality of packaging may result in increased freight damages. Is reducing packaging costs counterproductive? Not necessarily. Here are a few tips for reducing your packaging costs while keeping damages to a minimum.

Think Inside The Box

Is the product’s box the right size for the product, or is it a couple sizes too big? Boxes must provide ample space to fit the product and any padding that’s necessary to protect it, but after a certain point, a bigger box only adds extra expense. Note that an oversized box may add expense in three ways:

1. The higher cost of the box itself

2. The cost for added packaging materials to fill the empty space in the box

3. An increased cost to ship the box.

In fact, reducing package size has become even more important with FedEx and UPS now implementing dimensional weighing. This dramatically raises the shipping price for large volume, low weight packages. Some have estimated that shipping costs for these packages may increase as much as 60%. For these reasons, it is a good idea to review the size of the boxes that you are using in comparison to the size of the products that you ship.

Price Shop

Choosing low quality packaging in order to save packaging costs isn’t always a wise decision. However, keep in mind that the prices of your high quality packaging materials are likely to fluctuate. Keep an eye on prices and make a point to stock up when prices are low. If it has been a while since you’ve compared pricing between suppliers, look around – you might be able to find the same quality materials at a lower cost.

Does the End Justify the Means?

Think about the value of your product. How much are you willing to spend to protect it? Would a 50% decrease in packaging cost justify a 5% increase in product damage? Maybe, maybe not. The next time you buy light bulbs, look at the packaging. The cheap incandescent bulbs are typically shipped in flimsy cardboard, while the more expensive fluorescent bulbs are encased in durable form-fitting plastic. In this case, the packaging is designed to match the cost of replacement, rather than the delicacy of the product.

Test, Test, Test

No matter how you change your packaging, make sure you test the results. Monitor the damage rate of the product closely. Is there increased damage? If so, follow the steps above to determine if the reduced packaging cost is worth the increased claim cost. (Don’t forget to include the administrative cost of claims in your consideration). Also monitor other changes; is there an increase in loss claims? This could indicate a problem with labeling. Have sales changed? This could indicate a positive or negative reaction to your packaging by your distributer or end consumer. With a little luck and lots of testing, you’ll find the most cost-effective packaging.

Back To Top